Flex Strips
Flex Strip IP65 Digital 60 
The PROLED FLEX STRIPS DIGITAL are perfect for pixel applications. With the PROLED WS2812 PIXEL CONTROLLER, the DiGidot C4 Live or DiGidot C4 Extended controller each LED can be controlled individually.
- Digital controllable WS2813 LEDs.
- Double data line. By failure of one LED, the data will be passed to the next LED.
- To avoid a voltage drop, a new power input of 5 VDC is needed every 1,5 m.
- 3 colours in one LED, therefore 100% smooth colour mixing.
- High flexibility – adaptable to round shapes.
- Installation with clamps or special glue. The 3M adhesive tape on the strip’s backside (self adhesive) is only as fit-up aid.
- IP65 for outdoor use (power supply cable/end caps IP65 when correctly sealed)
PROLED FLEX STRIP IP68 Mounting Manual505.2 KBEULUMDAT/IES informationORDER EXAMPLE SPECIAL LENGTHS5 years warranty information
Technical Data
| IP classification: | IP65 (for under water use) |
| Power source: | 5 VDC |
| Electrical connection: | 1x cable with 4-PIN to open wires |
| Maximum quantity per power input: | every 1,5 m a new power input of 5 VDC is needed |
| Average lifetime*: | 50.000 h at L80/B10 |
| Operating temperature range: | -10° C till +45° C |
| Width x height: | 13 x 6 mm |
| Cuttable: | every LED (1,67 cm) |
*With correct installation and a suitable thermal management.
Photometric Data
| LED type: | SMD RGB 3-in-1 LEDs |
| Luminous flux: | red 70 Lumen per m green 180 Lumen per m blue 50 Lumen per m r+g+b (white) 280 Lumen per m |
| Wave length: | red 620 nm green 525 nm blue 470 nm |
| Beam angle: | 120° |
Due to conditions of production photometric data can vary from production batch to production batch within the EU directive.
