DiGidot PxLNet Transmitter / Transceiver

DiGidot PxLNet Transmitter / Transceiver

The DiGidot PxLNet Transmitter is a data range extender that converts the SPI signal to DiGidot PxLNet protocol. So it is possible to transmit the SPI signal from Digital Strips from the outputs of a DiGidot C4 Interface over a long distance (max. 250 m).

A suitable PxLNet Transceiver module is required on the side of the Digital Strips for each output of the DiGidot C4. The PxLNet Transceiver module is very compact and works with 5-48 volt, so it can be comfortably supplied by the power supply of the Digital Strips. A standard RJ45 network cable (from CAT5 onwards) is used as the data line for each output. The PxLNet Transmitter is conveniently plugged into the existing output socket of the DiGidot C4 interface. A separate plug connection or cabling is not necessary. A DiGidot C4 interface is required to operate the PxLNet Transmitter.

The PxLNet Transceiver module can be used as a receiver or as transmitter. This makes it possible to transfer a SPI signal e.g. from one end of a Digital Strip over a long distance to the next Digital Strip. Therefore two PxLNet Transceiver modules are necessary.

The maximum distance between a PxLNet Transmitter or transceiver to the receiving transceiver module is 250 m.

The PxLNet Transmitter and the PxLNet Transceiver module are available individually or as a set with PxLNet Transmitter and four PxLNet Transceiver modules.

suitable for:

FLEX STRIP DIGITAL 60 SEG RGB 12
FLEX STRIP DIGITAL 60 SEG RGB 24
FLEX STRIP DIGITAL 60 SEG RGBW
FLEX STRIP DIGITAL 30
FLEX STRIP DIGITAL 60-5
FLEX STRIP DIGITAL 60-12
FLEX STRIP IP65 DIGITAL 30
FLEX STRIP IP65 DIGITAL 60
FLEX TUBE PRO DIGITAL RGBW
FLEX TUBE FLAT DIGITAL RGBW

Technical Data DiGidot PxLNet Transmitter

Power Range:5-24 VDC
Outputs:4 (4x RJ45 – Ethernet)
Operating temperature range:0° C till +50° C
Dimensions (l x w x h):65 x 65 x 20 mm
Weight:

0,07 kg

Technical Data DiGidot PxLNet Transceiver module

Power Range:5-48 VDC (through soldering pads)
Control input:1 (RJ45 – Ethernet)
Output signal:SPI-Signal (through soldering pats)
Operating temperature range:0° C till +50° C
Dimensions (l x w x h):45 x 15 x 13 mm
Weight:

0,01 kg


Product Types

Are you

a lighting designer, an electrical designer or an architect?

And you need information on lighting values, technical planning, installation situations or have questions about suitable lamps?

Just ask us